LED driver pic .jpg 

(picture from http://www.projects.cappels.org)

 

今天與各位分享IEC/EN 61347-2-13 標準適用範圍及LED driver 安裝方式分類, 尤其以後者的分類方式會直接影響到線路的設計

 

IEC/EN 61347-2-13標準適用範圍如下:

 

a. LED driver 輸出端只能連接LED module

b. 額定輸入要求 (Input rating):

                - ≤ 250Vdc or

                - a.c. supplies ≤ 1000Vac at 50 Hz or 60 Hz

c. 額定輸出要求 (Output rating):

- SELV Voltage or SELV Equivalent Voltage or Higher Voltage

                - Constant voltage output and/or Constant current output

 

安裝方式分類:

 

a. 內建式(Built-in type):

- Be built into a luminaire or a box or an enclosure

- Not mounted outside of a luminaire

 Built-in .jpg 

b. 外接式 (Independent type):

 - Controlgear housed in a suitable enclosure which provides all the necessary protection

 - Can be mounted outside of a luminaire

 Independent.jpg 

c. 內建集合式 (Integral type):

- Non-replaceable part of a luminaire

 - Cannot be tested separately from the luminaire

 Intergal.jpg 

 如想瞭解更多資訊, 請來信致: tuvsudtwnelp@pixnet.net 

arrow
arrow
    全站熱搜

    LED Safety 發表在 痞客邦 留言(0) 人氣()