一年又快過一半了, 小編今天又為大家整理銷歐盟有問題的產品清單, 其中我們一樣可以看出, 大部份還是以燈串為主, 而問題大多出在電擊危險, 提供以下表單資料, 讓各位參考
當然, 如有任何認證上的需求皆可以跟小編連絡
18 A12/0521/13 |
Hungary |
Category: Lighting chains |
Fire and Electric shock The product poses a risk of fire and electric shock because: · The cross-sectional area of the external and internal wires is not sufficient and the wires could overheat. · The wire ends soldered to terminals of flashing unit and the LEDs are not adequately protected against pulling and twisting. · The accessible basic insulated wires can come into contact with sharp edges of the flashing switch and control unit. · The electrical insulation is not adequate. · It is recommended for outdoor use but is not protected against moisture. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
|
Compulsory measures: Withdrawal of the product from the market and recall of the product from end users
|
30 A12/0534/13 |
Hungary |
Category: Lighting chains
|
Fire and Electric shock The product poses a risk of fire and electric shock because: · The cross-sectional area of the external and internal wires is not sufficient and the wires could overheat. · The wire ends soldered to terminals of the flashing unit and the lamps are not adequately protected against pulling and twisting. · The accessible basic insulated wires can come into contact with sharp edges of the flashing switch and control unit. · The lampholder contacts are not protected against loosening and the live parts may become accessible. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
|
Compulsory measures: Withdrawal of the product from the market and recall of the product from end users
|
32 A12/0536/13 |
Hungary |
Category: Lighting equipment
|
Electric shock and Fire The product poses a risk of fire and electric shock because: · The cross-sectional area of the cores in the mains supply cord is not sufficient. In case of a short circuit the wires may overheat and could cause a fire. · The dimensions of the plug are less than required therefore the user may touch the pin of the plug during connection. · The wire ends of the mains supply cord are not adequately protected against pulling and twisting and they may therefore become free and accessible. · The storage compartment of the mains has sharp edges. In case of damage to the cord, live parts could become accessible. · The protective cover for the LED panel can be removed by hand during charging, resulting in live parts becoming accessible. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
|
Compulsory measures: Withdrawal of the product from the market
|
37 A12/0541/13 |
Spain |
Category: Lighting equipment |
Electric shock The cable is not protected against abrasion where it is in contact with metal parts. If the cable becomes damaged the user might get an electric shock. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60598.
|
Compulsory measures: Recall of the product from end users
|